ICIS and CPCIF have released a new study shedding light on the impacts of the European Union's circularity regulation on global demand for recycled plastics, generally and China's chemical industries, in particular, with key implications across packaging, automotive, and textiles.
Located at IMRO's headquarters in Uffenheim, Germany, the facility will combine ZenRobotics robotic and sensor-based sorting technologies with IMRO's processing lines to efficiently recover valuable materials from complex waste streams. A key focus will be the treatment of incinerator bottom ash. IBA typically contains a diverse mix of ash, glass, ceramics, and metals, including ferrous and non-ferrous fractions. Through fully automated identification and recovery processes, the facility will extract high-value metals such as aluminium, copper, and stainless steel from IBA and other hard-to-process waste, enhancing both material purity and operational efficiency.
This strong support from organisations throughout Europe confirms EuCIA's conviction that composites circularity is a key driver for the entire value chain and will only be fully achieved through the collaboration of all stakeholders. The ECCA, a sectorial alliance of EuCIA, will provide a platform for knowledge sharing and cooperation, driving collective action to establish truly circular, sustainable value chains for composite materials. Alignment with EU policy frameworks such as the Green Industrial Deal and the Circular Economy Act (which is currently undergoing public consultation) will be key to the Alliance's success. Through EuCIA, the ECCA has already opened a dialogue with EU policy officers.
As waste streams grow increasingly complex, operators face a dual challenge: recovering as many valuable materials as possible while ensuring consistent quality. AISEE addresses these challenges by accelerating the commissioning of large-scale projects with Pellenc's NIR optical sorters and continuously monitoring waste streams at key points in the sorting process.
In total, the EU generated 58.2 million tonnes of food waste, which includes edible and inedible parts, indicating a slight increase of 0.7% compared with 2022 (57.8 million tonnes).
Accreditation by DAkkS ensures that PlastCert, as a certification body, meets the highest standards of competence and impartiality. It promotes ongoing quality assurance and continuous improvement of certification processes. This strengthens confidence in PlastCert's certifications among both certified companies and purchasers of certified products.
The demanding requirements for quality and quantity in waste stream separation call for new solutions to meet these challenges. One promising approach lies in the use of artificial intelligence (AI) and computer vision, combined with existing technologies such as near-infrared (NIR) cameras. This article aims to introduce these technologies, explain their exponential growth, explore current applications in waste sorting, and highlight their potential for the future.
BlockTexx's process separates polyester and cellulose from post-consumer textiles and clothing, providing the polyester for Erema's technology. The Intarema FibrePro:IV system will process the polyester into recycled pellets suitable for new garment production.
The global transformation towards a climate-neutral economy requires a rapid expansion of technologies such as wind turbines, electromobility and automated production systems. A central element of these technologies are neodymium-iron-boron (NdFeB) magnets, whose thermal performance is often improved by the addition of the heavy rare earth element dysprosium (Dy).
Metals and minerals form the basis of modern societies and are indispensable for tackling global challenges such as climate change, urbanization and technological transformation. And the demand for strategic metals is growing dynamically.
Lithium is the "white gold" of the energy transition. No other metal has gained so much importance in recent years, as it is indispensable for the production of lithium-ion batteries, which form the core of modern electric vehicles.
Titanium is the metal of choice when lightness, strength and corrosion resistance are important. Without titanium, neither the engines of modern jets would work reliably, nor would spacecraft be able to withstand extreme temperatures. However, the EU does not produce a single gram of titanium sponge and is almost completely dependent on a few supplier countries. Geopolitical tensions, trade restrictions and increasing demand, especially from the aerospace industry, make titanium a strategic risk factor. This makes it all the more important to reduce dependency. Recycling, innovative production processes and new partnerships could pave the way for a more robust, sustainable supply. The study "Titanium metal in the EU: Strategic relevance and circularity potential" by the European Commission's Joint Research Centre sheds light on how the titanium supply chain works today, where the greatest risks lie - and how Europe can mitigate it with a circular economy, technology and smart policies.
The automotive industry must reduce both emissions during operations and the ecological footprint of production. With electrification, the focus is increasingly on "embedded emissions", especially from steel production. Steel accounts for 50 to 66 percent of vehicle weight and is the second largest source of production emissions in electric cars after the battery. The decarbonization of the steel industry is therefore considered a key issue. The switch from coal-based blast furnaces to hydrogen-based direct reduction and electric arc furnaces opens up new avenues, especially through more use of recycled scrap. However, the quality of scrap remains problematic: End-of-life vehicles (ELVs) deliver large quantities, but high copper contamination prevents them from being used in high-quality flat steel. With increasing vehicle electrification, this problem is exacerbated. Against this background, the Institut Mobilités en Transition has examined "deep dismantling". The results were published in the report "Car-to-Car-Steel - Potential of End-of-Life Vehicle deep-dismantling and use of copper depolluted steel scrap to decarbonize automotive flat steel production".
Gold mining is extremely resource- and energy-intensive, while at the same time the amount of waste electrical and electronic equipment (WEEE) is growing rapidly worldwide. WEEE contains highly concentrated gold deposits and thus offers great potential for urban mining and the implementation of the circular economy. Industrially, pyrometallurgical processing in copper smelters dominates, in which plastics in the material serve as an energy carrier. This technique is well established, but causes significant fossil CO₂ emissions, making it difficult to decarbonize. This results in a conflict of goals between increasing recycling rates and climate protection. The study "Climate change vs. circular economy: Challenges of the most common route for recycling gold from WEEE" by German scientists uses a life cycle analysis to analyse the climate balance of this recycling route and examines scenarios for reducing greenhouse gas emissions in order to identify technological and systemic solutions. The study was published in "Sustainability".
Limiting global warming requires greatly reduced CO₂ emissions. The steel sector accounts for around 7 percent of energy-related emissions and is difficult to decarbonize. Recycling is particularly effective here, as steel production from scrap causes significantly fewer emissions than primary production. In addition to new technologies such as hydrogen-based direct reduction, a higher recycling input rate is key. The study "Methodology development for estimating the impact of restriction factors to promote national steel recycling" by Japanese scientists aims to develop a methodology that makes it possible to identify the main barriers to the promotion of steel recycling in different countries and to determine their quantitative effects.
Global plastic consumption exceeded 400 million tons for the first time in 2022. In the EU, it is around 100 kilograms per capita and could double by 2060. Production and processing contribute significantly to greenhouse gas emissions, while mismanagement and losses release millions of tons of macro and microplastics into the environment. The EU has set an important course with the Green Deal, the Plastics Strategy and the Single-Use Plastics Directive. Nevertheless, the recycling rate remains low at around 20 percent, and chemical recycling or bio-based plastics have so far only played a minor role. Against this background, the Joint Research Centre's study "Plastics materials flows in the EU-27 and their environmental impacts" examines plastic flows in the EU-27 for 2022. The aim is to identify fields of action for a circular plastics economy.
The "Global Plastics Flow 2023" study by Conversio Market & Strategy on behalf of BKV, GKV, VDMA, Wir sind Kunststoff and Messe Düsseldorf shows that awareness and initiatives for the environmentally sound treatment of plastic waste and for its circular economy are increasing worldwide, but that progress is not yet satisfactorily related to increasing plastic production.
Plastic is practical, cheap and everywhere, but the price for the environment and health is high. Worldwide, plastic waste accumulates in soils, rivers and oceans, where it decomposes very slowly and enters the food chain as microplastics. The search for alternatives is therefore more urgent than ever. Biodegradable plastics are seen as a beacon of hope. But the reality is more complicated: Many materials only degrade in special composting plants, their production is more expensive, and the necessary infrastructure is often still lacking. The report "Exploring the pathways to sustainability: A comprehensive review of biodegradable plastics in the circular economy" by scientists from China and Pakistan shows how bioplastics can be embedded in the circular economy, where their strengths lie and what hurdles still need to be overcome. The report was published in Materials Today Sustainability.
Today's economy predominantly follows a linear model that consumes and disposes of resources. The circular economy counters this with a model that keeps materials in the cycle for as long as possible. One key to this is deposit systems, which promote the return of packaging through monetary incentives. While they are established in many European countries, the focus of research is mostly on households. On the other hand, the role of companies, especially in the horeca sector, has been little investigated, although there is great potential for resource conservation here. In practice, however, deposit packaging is often not returned. Successful recycling therefore depends both on the behaviour of consumers and on the design of the collection structures. Against this background, the study "Motivating recycling behaviour: The role of deposit return systems and collection point design" by two Dutch scientists examines how guests in a university cafeteria can be motivated to recycle correctly through nudging, prompting and the design of sustainable collection points. The study was published in "Cleaner Waste Systems".
The consumption of textiles in the European Union has been rising continuously for years, with EU citizens now consuming an average of around 19 kilograms of textiles per year. This leads to high resource consumption, waste and environmental pollution. To counteract this, the EU is pursuing a strategy for sustainable and circular textiles. The focus is on longer service life, re-use and recycling, while incineration and landfill are only to be last resorts. A central element is the international trade in second-hand clothing. While high-quality pieces remain in Europe, the majority is exported to countries with corresponding markets, especially Africa. There, as in Kenya, second-hand clothing plays an important role. Using Humana as an example, the Swe-dish Environmental Research Institute has investigated how the value chain from collected tex-tiles in Europe to sorting centres and markets in Kenya is organised and what economic and ecological significance it has for the circular economy.
